不銹鋼液壓濾芯由單層或多層金屬絲網與濾料制成，層數與構成絲網的目數根據不同的使用條件與用途而定， 同心率高、承受壓力大、直度好，不銹鋼材質，不帶任何毛刺，保證使用壽命長。工業應用于潤滑油、燃油的粗濾、 精濾中的蒸餾、吸收、蒸發、過濾等工藝過程，有多種型號和規格，安裝更換;方便快捷，初始壓差小、清洗周期長。不銹鋼濾芯簡介不銹鋼液壓濾芯是過濾行業的名詞，為了凈化原生態的資源和資源的再利用，而需要的凈化設備， 濾芯主要用在油過濾、空氣過濾、水過濾、空氣過濾等過濾行業。除去液體或者空氣中少量固體顆粒， 可保護設備的正常工作或者空氣的潔凈，當流體進入置有一定規格濾網的濾芯后，其雜質被阻擋， 而清潔的流物通過濾芯流出，液體濾芯使液體(包括油、水等)使受到污染的液體被潔凈到生產、生活所需要的狀態， 也就是使液體達到一定的潔凈度?？諝馐故艿轿廴镜目諝獗粷崈舻缴a、生活所需要的狀態，也就是使空氣達到一定的潔凈度。 較低(小于2~5mg/L)的水質進一步凈化。不銹鋼液壓濾芯的特點1良好的過濾性能、對2-200um的過濾粒度均可發揮均一的表面過濾性能2耐蝕性、耐熱性、耐壓性、耐磨性好；3不銹鋼濾芯氣孔均勻、的過濾精度；4不銹鋼濾芯單位面積的流量大；5不銹鋼濾芯適用低溫、高溫環境； 清洗之后可以再使用，免更換。不銹鋼液壓油濾芯的應用石油化工、油田管道過濾；加油設備、工程機械設備燃油過濾；水處理行業設備過濾；制藥及食品加工領域；

      不銹鋼濾芯工作原理與設計特點一、不銹鋼濾芯工作原理不銹鋼濾芯主要用在油過濾、空氣過濾、水過濾等過濾行業。除去液體或者空氣中少量固體顆粒的，可保護設備的正常工作或者空氣的潔凈， 當流體進入置有一定規格濾網的濾芯后，其雜質被阻擋，而清潔的流物通過濾芯流出。通過壓差控制、定時控制自動清洗濾芯。當過濾器內雜質積聚 在濾芯表面引起進出口壓差增大到設定值，或定時器達到預置時間時，電動控制箱發出信號，驅動反沖洗機構。二、不銹鋼濾芯設計特點1、安裝有不銹鋼濾芯的過濾設備采用專利技術內部機械結構，實現了真正意義上的高壓反沖洗功能，可輕松徹底地清除濾網截留的雜質，清洗無死角， 通量無衰減，保障了過濾效率和長久的使用壽命。2、不銹鋼濾芯采用304、316L不銹鋼濾網，強度大、精度高、耐腐蝕，更高過濾精度可達0.5微米。3、不銹鋼濾芯通過自身的檢索和應變功能，實現自動反沖洗，可應對不穩定的水質波動，無需人工干預。4、不銹鋼濾芯易損件少，無耗材，運行維護費用低，操作管理簡單。5、不銹鋼濾芯運行，可以根據不同水源和過濾精度靈活調整反沖洗壓差時間和時間設定值。6、不銹鋼濾芯在反沖洗過程中，濾網依次進行反沖洗操作；確保濾網安全、高效清洗，而其他濾網不受影響，繼續過濾。7、不銹鋼濾芯可采用氣動排污閥，反沖洗歷時短，反沖洗耗水量少，環保經濟。8、不銹鋼濾芯結構設計緊湊合理，占地面積小，安裝移動靈活方便。三，不銹鋼濾芯技術參數1、工作壓力：1.6-2.0Mpa2、系統壓損：30-50Kpa3、工作溫度：600℃4、濾網孔徑：1-1000μm。沖洗時間：反沖洗單循環過程23秒左右四、不銹鋼濾芯應用范圍1.石油化工、油田管道過濾；2.加油設備、工程機械設備燃油過濾；3.水處理行業設備過濾；4.制藥及食品加工領域；5.適用于電子、石油、化工、醫藥、食品等工業部門中的預處理和后處理系統上。對含懸浮雜質較低（小于2~5mg/L）的水質進一步凈化。不銹鋼濾芯由主濾材采用多層不銹鋼絲網，過濾精度為0.5-200um，其外形尺寸可按用戶要求加工。文章由安平華納不銹鋼濾芯原創，http://m.cnyaxiang.com/未經允許嚴禁轉載。

       Stainless steel hydraulic filter element is made of single or multi-layer metal mesh and filter material, the number of layers and mesh mesh according to different use conditions and purposes, high heart rate, high pressure, good straightness, stainless steel material, without any burr, ensure long service life. Industrial application in lubricating oil, fuel oil coarse filtration, distillation, absorption, evaporation, filtration and other processes, there are a variety of models and specifications, installation and replacement; Convenient and quick, small initial differential pressure, long cleaning cycle. Stainless steel hydraulic filter is the term of the filter industry, in order to purify the original ecological resources and resources reuse, and the need for purification equipment, filter is mainly used in oil filtration, air filtration, water filtration, air filtration and other filtration industries. Remove a small amount of solid particles in the air, or liquid is the normal work of the protection device and the air is clean, when the fluid is placed into a certain size of filter cartridge, the impurity is blocked, and clean flow through filter outflow, liquid filter makes a liquid (including oil, water, etc.) of contaminated fluids are clean to the status of production, life need, That is to get the liquid to a certain degree of cleanliness. Air makes the polluted air clean to the state required for production and life, that is, to make the air reach a certain cleanliness. The lower water (less than 2~5mg/L) is further purified. The characteristics of stainless steel hydraulic filter element 1 good filtration performance, 2-200um filter particle size can play a uniform surface filtration performance 2 corrosion resistance, heat resistance, pressure resistance, wear resistance; 3 stainless steel filter element uniform pores, filtration accuracy; 4 stainless steel filter element per unit area of large flow; 5 stainless steel filter for low temperature, high temperature environment; After cleaning, it can be reused without replacement. Application of stainless steel hydraulic oil filter element in petrochemical, oil field pipeline filtration; Fuel filtration for refueling equipment and construction machinery equipment; Water treatment industry equipment filtration; Pharmaceutical and food processing;

      Stainless steel filter is mainly used in oil filtration, air filtration, water filtration and other filtration industries. Remove a small amount of solid particles in the liquid or air, can protect the normal operation of the equipment or clean air, when the fluid into the filter with a certain specification of the filter, its impurities are blocked, and clean flow out of the filter. Filter element is automatically cleaned by differential pressure control and timing control. When the impurity in the filter accumulates on the surface of the filter element and causes the inlet and outlet pressure difference to increase to the set value, or the timer reaches the preset time, the electric control box sends a signal to drive the backwash mechanism. 1, installed with stainless steel filter filter equipment with patented internal mechanical structure, to achieve a true sense of high pressure backwash function, can easily and thoroughly remove the impurities trapped by the filter screen, cleaning no dead Angle, flux no attenuation, to ensure the filtration efficiency and long service life. 2, stainless steel filter element adopts 304, 316L stainless steel filter, high strength, high accuracy, corrosion resistance, higher filtration accuracy up to 0.5 micron. 3, stainless steel filter through its own retrieval and strain function, automatic backwash, can cope with unstable water quality fluctuations, without manual intervention. 4, stainless steel filter element wearing parts less, no supplies, low operation and maintenance costs, simple operation and management. 5, stainless steel filter operation, can be flexibly adjusted according to different water sources and filtering precision backwashing differential pressure time and time set value. 6, stainless steel filter element in the backwashing process, the filter screen in turn backwashing operation; Ensure that the filter is safe and efficient cleaning, while other filters are not affected, continue to filter. 7, stainless steel filter can use pneumatic sewage valve, short backwashing time, backwashing water consumption is less, environmental protection and economy. 8, stainless steel filter structure design is compact and reasonable, covers an area of small, flexible and convenient installation and movement. 1, working pressure: 1.6-2.0mPA2, system pressure loss: 30-50kpa3, working temperature: 600℃4, mesh aperture: 1-1000μm. Washing time: backwash single cycle process of about 23 seconds iv. Stainless steel filter application range 1. Petrochemical, oilfield pipeline filtration; 2. Fuel filtration for refueling equipment and construction machinery equipment; 3. Equipment filtration in water treatment industry; 4. Pharmaceutical and food processing fields; 5. Suitable for electronic, petroleum, chemical, pharmaceutical, food and other industrial sectors of the pre-treatment and post-treatment system. The water with low suspended impurities (less than 2~5mg/L) is further purified. The stainless steel filter element is made of main filter material and adopts multi-layer stainless steel screen. The filtering accuracy is 0.5-200um. The size can be processed according to user requirements. The article by anping Huana stainless steel filter element original, http://www.huanawl.com/ is strictly prohibited without permission.